更新版本 v2.17.7

Co-authored-by: chensiyuan <chensiyuan@pushplus.plus>

README-en.md

@@ -48,12 +48,83 @@ docker pull whyour/qinglong:debian
 
 ### npm
 
-The npm version supports `debian/ubuntu/centos/alpine` systems and requires `node/python3` to be installed.
+The npm version supports `debian/ubuntu/alpine` systems and requires `node/npm/python3/pip3/pnpm` to be installed.
 
 ```bash
 npm i @whyour/qinglong
 ```
 
+## Deployment
+
+### Docker (Recommended)
+
+```bash
+# curl -sSL get.docker.com | sh
+docker run -dit \
+  -v $PWD/ql/data:/ql/data \
+  # The 5700 after the colon is the default port, if QlPort is set, it needs to be the same as QlPort.
+  -p 5700:5700 \
+  # Deployment paths are not required, e.g. /test.
+  -e QlBaseUrl="/" \
+  # Deployment port is not required, when using host mode, you can set the port after service startup, default 5700
+  -e QlPort="5700" \
+  --name qinglong \
+  --hostname qinglong \
+  --restart unless-stopped \
+  whyour/qinglong:latest
+```
+
+### Docker-compose (Recommended)
+
+```bash
+# curl -L https://github.com/docker/compose/releases/download/1.16.1/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
+mkdir qinglong
+wget https://raw.githubusercontent.com/whyour/qinglong/master/docker/docker-compose.yml
+
+# start
+docker-compose up -d
+# stop
+docker-compose down
+```
+
+### Podman (Recommended)
+
+```bash
+# https://podman.io/getting-started/installation
+podman run -dit \
+  --network bridge \
+  -v $PWD/ql/data:/ql/data \
+  # The 5700 after the colon is the default port, if QlPort is set, it needs to be the same as QlPort.
+  -p 5700:5700 \
+  # Deployment paths are not required, e.g. /test.
+  -e QlBaseUrl="/" \
+  # Deployment port is not required, when using host mode, you can set the port after service startup, default 5700
+  -e QlPort="5700" \
+  --name qinglong \
+  --hostname qinglong \
+  docker.io/whyour/qinglong:latest
+```
+
+### Npm
+
+It is recommended to use a pure system installation to avoid losing the original system data, you need to install node/npm/python3/pip3/pnpm yourself
+
+```bash
+# Debian/Ubuntu
+curl -sL https://deb.nodesource.com/setup_20.x | sudo -E bash -
+```
+
+```bash
+npm install -g node-pre-gyp pnpm@8.3.1
+npm install -g @whyour/qinglong
+qinglong
+# Add the environment variables QL_DIR and QL_DATA_DIR when prompted
+export QL_DIR=""
+export QL_DATA_DIR=""
+# Run again
+qinglong
+```
+
 ## Built-in commands
 
 - task
@@ -110,89 +181,16 @@ ql resettfa
 | days | File path for task execution |
 | file_path | The name of the environment variable that needs to be concurrent or specified at the time of task execution |
 
-## Deployment
-
-### Docker (Recommended)
-
-```bash
-# curl -sSL get.docker.com | sh
-docker run -dit \
-  -v $PWD/ql/data:/ql/data \
-  # The 5700 after the colon is the default port, if QlPort is set, it needs to be the same as QlPort.
-  -p 5700:5700 \
-  # Deployment paths are not required, e.g. /test.
-  -e QlBaseUrl="/" \
-  # Deployment port is not required, when using host mode, you can set the port after service startup, default 5700
-  -e QlPort="5700" \
-  --name qinglong \
-  --hostname qinglong \
-  --restart unless-stopped \
-  whyour/qinglong:latest
-```
-
-### Docker-compose (Recommended)
-
-```bash
-# curl -L https://github.com/docker/compose/releases/download/1.16.1/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
-mkdir qinglong
-wget https://raw.githubusercontent.com/whyour/qinglong/master/docker/docker-compose.yml
-
-# start
-docker-compose up -d
-# stop
-docker-compose down
-```
-
-### Podman (Recommended)
-
-```bash
-# https://podman.io/getting-started/installation
-podman run -dit \
-  --network bridge \
-  -v $PWD/ql/data:/ql/data \
-  # The 5700 after the colon is the default port, if QlPort is set, it needs to be the same as QlPort.
-  -p 5700:5700 \
-  # Deployment paths are not required, e.g. /test.
-  -e QlBaseUrl="/" \
-  # Deployment port is not required, when using host mode, you can set the port after service startup, default 5700
-  -e QlPort="5700" \
-  --name qinglong \
-  --hostname qinglong \
-  docker.io/whyour/qinglong:latest
-```
-
-### Local
-
-It is recommended to use a pure system installation to avoid losing the original system data, you need to install node/npm/python3/pip3 yourself
-
-```bash
-# Debian/Ubuntu
-curl -sL https://deb.nodesource.com/setup_20.x | sudo -E bash -
-# Centos
-curl --silent --location https://rpm.nodesource.com/setup_20.x | sudo bash
-```
-
-```bash
-npm install -g node-pre-gyp pnpm@8.3.1
-npm install -g @whyour/qinglong
-qinglong
-# Add the environment variables QL_DIR and QL_DATA_DIR when prompted
-export QL_DIR=""
-export QL_DATA_DIR=""
-# Run again
-qinglong
-```
-
 ## Development
 
 ```bash
-$ git clone https://github.com/whyour/qinglong.git
-$ cd qinglong
-$ cp .env.example .env
+git clone https://github.com/whyour/qinglong.git
+cd qinglong
+cp .env.example .env
 # Recommended use pnpm https://pnpm.io/zh/installation
-$ npm install -g pnpm@8.3.1
-$ pnpm install
-$ pnpm start
+npm install -g pnpm@8.3.1
+pnpm install
+pnpm start
 ```
 
 Open your browser and visit <http://127.0.0.1:5700>

README.md

@@ -50,12 +50,83 @@ docker pull whyour/qinglong:debian
 
 ### npm
 
-npm 版本支持 `debian/ubuntu/centos/alpine` 系统，需要自行安装 `node/python3`
+npm 版本支持 `debian/ubuntu/alpine` 系统，需要自行安装 `node/npm/python3/pip3/pnpm`
 
 ```bash
 npm i @whyour/qinglong
 ```
 
+## 部署
+
+### docker (推荐)
+
+```bash
+# curl -sSL get.docker.com | sh
+docker run -dit \
+  -v $PWD/ql/data:/ql/data \
+  # 冒号后面的 5700 为默认端口，如果设置了 QlPort, 需要跟 QlPort 保持一致
+  -p 5700:5700 \
+  # 部署路径非必须，比如 /test
+  -e QlBaseUrl="/" \
+  # 部署端口非必须，当使用 host 模式时，可以设置服务启动后的端口，默认 5700
+  -e QlPort="5700" \
+  --name qinglong \
+  --hostname qinglong \
+  --restart unless-stopped \
+  whyour/qinglong:latest
+```
+
+### docker-compose (推荐)
+
+```bash
+#  curl -L https://github.com/docker/compose/releases/download/1.16.1/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
+mkdir qinglong
+wget https://raw.githubusercontent.com/whyour/qinglong/master/docker/docker-compose.yml
+
+# 启动
+docker-compose up -d
+# 停止
+docker-compose down
+```
+
+### podman (推荐)
+
+```bash
+# https://podman.io/getting-started/installation
+podman run -dit \
+  --network bridge \
+  -v $PWD/ql/data:/ql/data \
+  # 冒号后面的 5700 为默认端口，如果设置了 QlPort, 需要跟 QlPort 保持一致
+  -p 5700:5700 \
+  # 部署路径非必须，比如 /test
+  -e QlBaseUrl="/" \
+  # 部署端口非必须，当使用 host 模式时，可以设置服务启动后的端口，默认 5700
+  -e QlPort="5700" \
+  --name qinglong \
+  --hostname qinglong \
+  docker.io/whyour/qinglong:latest
+```
+
+### npm
+
+建议使用纯净系统安装，避免系统原有数据丢失，需要自己安装 node/npm/python3/pip3/pnpm
+
+```bash
+# Debian/Ubuntu
+curl -sL https://deb.nodesource.com/setup_20.x | sudo -E bash -
+```
+
+```bash
+npm install -g node-pre-gyp pnpm@8.3.1
+npm install -g @whyour/qinglong
+qinglong
+# 根据提示增加环境变量 QL_DIR 和 QL_DATA_DIR
+export QL_DIR=""
+export QL_DATA_DIR=""
+# 再次执行
+qinglong
+```
+
 ## 内置命令
 
 - task
@@ -110,89 +181,16 @@ ql resettfa
 | days       | 需要保留的日志的天数                                                                        |
 | file_path  | 任务执行时的文件路径                                                                        |
 
-## 部署
-
-### docker (推荐)
-
-```bash
-# curl -sSL get.docker.com | sh
-docker run -dit \
-  -v $PWD/ql/data:/ql/data \
-  # 冒号后面的 5700 为默认端口，如果设置了 QlPort, 需要跟 QlPort 保持一致
-  -p 5700:5700 \
-  # 部署路径非必须，比如 /test
-  -e QlBaseUrl="/" \
-  # 部署端口非必须，当使用 host 模式时，可以设置服务启动后的端口，默认 5700
-  -e QlPort="5700" \
-  --name qinglong \
-  --hostname qinglong \
-  --restart unless-stopped \
-  whyour/qinglong:latest
-```
-
-### docker-compose (推荐)
-
-```bash
-#  curl -L https://github.com/docker/compose/releases/download/1.16.1/docker-compose-`uname -s`-`uname -m` -o /usr/local/bin/docker-compose
-mkdir qinglong
-wget https://raw.githubusercontent.com/whyour/qinglong/master/docker/docker-compose.yml
-
-# 启动
-docker-compose up -d
-# 停止
-docker-compose down
-```
-
-### podman (推荐)
-
-```bash
-# https://podman.io/getting-started/installation
-podman run -dit \
-  --network bridge \
-  -v $PWD/ql/data:/ql/data \
-  # 冒号后面的 5700 为默认端口，如果设置了 QlPort, 需要跟 QlPort 保持一致
-  -p 5700:5700 \
-  # 部署路径非必须，比如 /test
-  -e QlBaseUrl="/" \
-  # 部署端口非必须，当使用 host 模式时，可以设置服务启动后的端口，默认 5700
-  -e QlPort="5700" \
-  --name qinglong \
-  --hostname qinglong \
-  docker.io/whyour/qinglong:latest
-```
-
-### 本机
-
-建议使用纯净系统安装，避免系统原有数据丢失，需要自己安装 node/npm/python3/pip3
-
-```bash
-# Debian/Ubuntu
-curl -sL https://deb.nodesource.com/setup_20.x | sudo -E bash -
-# Centos
-curl --silent --location https://rpm.nodesource.com/setup_20.x | sudo bash
-```
-
-```bash
-npm install -g node-pre-gyp pnpm@8.3.1
-npm install -g @whyour/qinglong
-qinglong
-# 根据提示增加环境变量 QL_DIR 和 QL_DATA_DIR
-export QL_DIR=""
-export QL_DATA_DIR=""
-# 再次执行
-qinglong
-```
-
 ## 开发
 
 ```bash
-$ git clone https://github.com/whyour/qinglong.git
-$ cd qinglong
-$ cp .env.example .env
+git clone https://github.com/whyour/qinglong.git
+cd qinglong
+cp .env.example .env
 # 推荐使用 pnpm https://pnpm.io/zh/installation
-$ npm install -g pnpm@8.3.1
-$ pnpm install
-$ pnpm start
+npm install -g pnpm@8.3.1
+pnpm install
+pnpm start
 ```
 
 打开你的浏览器，访问 <http://127.0.0.1:5700>

back/api/env.ts

@@ -51,6 +51,9 @@ export default (app: Router) => {
       const logger: Logger = Container.get('logger');
       try {
         const envService = Container.get(EnvService);
+        if (!req.body?.length) {
+          return res.send({ code: 400, message: '参数不正确' });
+        }
         const data = await envService.create(req.body);
         return res.send({ code: 200, data });
       } catch (e) {
@@ -217,7 +220,7 @@ export default (app: Router) => {
         } else {
           return res.send({
             code: 400,
-            message: '文件缺少name或者value字段，参考导出文件格式',
+            message: '每条数据 name 或者 value 字段不能为空，参考导出文件格式',
           });
         }
       } catch (e) {

back/app.ts

@@ -15,7 +15,7 @@ async function startServer() {
   await require('./loaders/app').default({ expressApp: app });
 
   const server = app
-    .listen(config.port, () => {
+    .listen(config.port, '0.0.0.0', () => {
       Logger.debug(`✌️ 后端服务启动成功！`);
       console.debug(`✌️ 后端服务启动成功！`);
       process.send?.('ready');

back/config/index.ts

@@ -19,7 +19,12 @@ const lastVersionFile = `https://qn.whyour.cn/version.yaml`;
 const rootPath = process.env.QL_DIR as string;
 const envFound = dotenv.config({ path: path.join(rootPath, '.env') });
 
-const dataPath = path.join(rootPath, 'data/');
+let dataPath = path.join(rootPath, 'data/');
+
+if (process.env.QL_DATA_DIR) {
+  dataPath = process.env.QL_DATA_DIR.replace(/\/$/g, '');
+}
+
 const shellPath = path.join(rootPath, 'shell/');
 const tmpPath = path.join(rootPath, '.tmp/');
 const samplePath = path.join(rootPath, 'sample/');
@@ -33,6 +38,8 @@ const sshdPath = path.join(dataPath, 'ssh.d/');
 const systemLogPath = path.join(dataPath, 'syslog/');
 
 const envFile = path.join(configPath, 'env.sh');
+const jsEnvFile = path.join(configPath, 'env.js');
+const pyEnvFile = path.join(configPath, 'env.py');
 const confFile = path.join(configPath, 'config.sh');
 const crontabFile = path.join(configPath, 'crontab.list');
 const authConfigFile = path.join(configPath, 'auth.json');
@@ -82,6 +89,8 @@ export default {
   sampleFile,
   confFile,
   envFile,
+  jsEnvFile,
+  pyEnvFile,
   dbPath,
   uploadPath,
   configPath,
@@ -94,6 +103,8 @@ export default {
     'crontab.list',
     'dependence-proxy.sh',
     'env.sh',
+    'env.js',
+    'env.py',
     'token.json',
   ],
   writePathList: [configPath, scriptPath],

back/config/subscription.ts

@@ -32,7 +32,9 @@ export function formatCommand(doc: Subscription, url?: string) {
     autoDelCron,
   } = doc;
   if (type === 'file') {
-    command += `raw "${_url}"`;
+    command += `raw "${_url}" "${proxy || ''}" "${
+      isNil(autoAddCron) ? true : Boolean(autoAddCron)
+    }" "${isNil(autoDelCron) ? true : Boolean(autoDelCron)}"`;
   } else {
     command += `repo "${_url}" "${whitelist || ''}" "${blacklist || ''}" "${
       dependences || ''

back/data/notify.ts

@@ -14,6 +14,7 @@ export enum NotificationMode {
   'aibotk' = 'aibotk',
   'iGot' = 'iGot',
   'pushPlus' = 'pushPlus',
+  'wePlusBot' = 'wePlusBot',
   'email' = 'email',
   'pushMe' = 'pushMe',
   'feishu' = 'feishu',
@@ -58,6 +59,7 @@ export class BarkNotification extends NotificationBaseInfo {
   public barkGroup = 'qinglong';
   public barkLevel = 'active';
   public barkUrl = '';
+  public barkArchive=""
 }
 
 export class TelegramBotNotification extends NotificationBaseInfo {
@@ -99,6 +101,12 @@ export class PushPlusNotification extends NotificationBaseInfo {
   public pushPlusUser = '';
 }
 
+export class WePlusBotNotification extends NotificationBaseInfo {
+  public wePlusBotToken = '';
+  public wePlusBotReceiver = '';
+  public wePlusBotVersion = '';
+}
+
 export class EmailNotification extends NotificationBaseInfo {
   public emailService: string = '';
   public emailUser: string = '';
@@ -107,6 +115,7 @@ export class EmailNotification extends NotificationBaseInfo {
 
 export class PushMeNotification extends NotificationBaseInfo {
   public pushMeKey: string = '';
+  public pushMeUrl: string = '';
 }
 
 export class ChronocatNotification extends NotificationBaseInfo {
@@ -144,9 +153,10 @@ export interface NotificationInfo
     AibotkNotification,
     IGotNotification,
     PushPlusNotification,
+    WePlusBotNotification,
     EmailNotification,
     PushMeNotification,
     WebhookNotification,
     ChronocatNotification,
     LarkNotification {}
-    
+

back/data/system.ts

@@ -2,13 +2,13 @@ import { sequelize } from '.';
 import { DataTypes, Model, ModelDefined } from 'sequelize';
 import { NotificationInfo } from './notify';
 
-export class AuthInfo {
+export class SystemInfo {
   ip?: string;
   type: AuthDataType;
   info?: SystemModelInfo;
   id?: number;
 
-  constructor(options: AuthInfo) {
+  constructor(options: SystemInfo) {
     this.ip = options.ip;
     this.info = options.info;
     this.type = options.type;
@@ -50,7 +50,7 @@ export type SystemModelInfo = SystemConfigInfo &
   Partial<NotificationInfo> &
   LoginLogInfo;
 
-export interface SystemInstance extends Model<AuthInfo, AuthInfo>, AuthInfo { }
+export interface SystemInstance extends Model<SystemInfo, SystemInfo>, SystemInfo { }
 export const SystemModel = sequelize.define<SystemInstance>('Auth', {
   ip: DataTypes.STRING,
   type: DataTypes.STRING,

back/loaders/app.ts

@@ -7,28 +7,23 @@ import linkDeps from './deps';
 import initTask from './initTask';
 
 export default async ({ expressApp }: { expressApp: Application }) => {
-  try {
-    depInjectorLoader();
-    Logger.info('✌️ Dependency Injector loaded');
-    console.log('✌️ Dependency Injector loaded');
-  
-    expressLoader({ app: expressApp });
-    Logger.info('✌️ Express loaded');
-    console.log('✌️ Express loaded');
-  
-    await initData();
-    Logger.info('✌️ init data loaded');
-    console.log('✌️ init data loaded');
-  
-    await linkDeps();
-    Logger.info('✌️ link deps loaded');
-    console.log('✌️ link deps loaded');
-  
-    initTask();
-    Logger.info('✌️ init task loaded');
-    console.log('✌️ init task loaded');
-  } catch (error) {
-    Logger.error(`✌️ depInjectorLoader expressLoader initData linkDeps failed, ${error}`);
-    console.error(`✌️ depInjectorLoader expressLoader initData linkDeps failed ${error}`);
-  }
+  depInjectorLoader();
+  Logger.info('✌️ Dependency loaded');
+  console.log('✌️ Dependency loaded');
+
+  await initData();
+  Logger.info('✌️ Init data loaded');
+  console.log('✌️ Init data loaded');
+
+  await linkDeps();
+  Logger.info('✌️ Link deps loaded');
+  console.log('✌️ Link deps loaded');
+
+  initTask();
+  Logger.info('✌️ Init task loaded');
+  console.log('✌️ Init task loaded');
+
+  expressLoader({ app: expressApp });
+  Logger.info('✌️ Express loaded');
+  console.log('✌️ Express loaded');
 };

back/loaders/deps.ts

@@ -23,18 +23,21 @@ async function linkCommand() {
     {
       src: 'update.sh',
       dest: 'ql',
+      tmp: 'ql_tmp',
     },
     {
       src: 'task.sh',
       dest: 'task',
+      tmp: 'task_tmp',
     },
   ];
 
   for (const link of linkShell) {
     const source = path.join(config.rootPath, 'shell', link.src);
     const target = path.join(commandDir, link.dest);
-    await rmPath(target);
-    await fs.symlink(source, target);
+    const tmpTarget = path.join(commandDir, link.tmp);
+    await fs.symlink(source, tmpTarget);
+    await fs.rename(tmpTarget, target);
   }
 }
 

back/loaders/initData.ts

@@ -18,6 +18,10 @@ export default async () => {
   const dependenceService = Container.get(DependenceService);
   const systemService = Container.get(SystemService);
 
+  // 初始化增加系统配置
+  await SystemModel.upsert({ type: AuthDataType.systemConfig });
+  await SystemModel.upsert({ type: AuthDataType.notification });
+
   const installDependencies = () => {
     // 初始化时安装所有处于安装中，安装成功，安装失败的依赖
     DependenceModel.findAll({
@@ -121,7 +125,7 @@ export default async () => {
         if (doc.command.includes(`${config.rootPath}/log/`)) {
           await CrontabModel.update(
             {
-              command: `${config.rootPath}/data/log/${doc.command.replace(
+              command: `${config.dataPath}/log/${doc.command.replace(
                 `${config.rootPath}/log/`,
                 '',
               )}`,
@@ -132,7 +136,7 @@ export default async () => {
         if (doc.command.includes(`${config.rootPath}/config/`)) {
           await CrontabModel.update(
             {
-              command: `${config.rootPath}/data/config/${doc.command.replace(
+              command: `${config.dataPath}/config/${doc.command.replace(
                 `${config.rootPath}/config/`,
                 '',
               )}`,
@@ -143,7 +147,7 @@ export default async () => {
         if (doc.command.includes(`${config.rootPath}/db/`)) {
           await CrontabModel.update(
             {
-              command: `${config.rootPath}/data/db/${doc.command.replace(
+              command: `${config.dataPath}/db/${doc.command.replace(
                 `${config.rootPath}/db/`,
                 '',
               )}`,
@@ -158,7 +162,4 @@ export default async () => {
   // 初始化保存一次ck和定时任务数据
   await cronService.autosave_crontab();
   await envService.set_envs();
-
-  // 初始化增加系统配置
-  await SystemModel.upsert({ type: AuthDataType.systemConfig });
 };

back/loaders/initFile.ts

@@ -5,7 +5,12 @@ import Logger from './logger';
 import { fileExist } from '../config/util';
 
 const rootPath = process.env.QL_DIR as string;
-const dataPath = path.join(rootPath, 'data/');
+let dataPath = path.join(rootPath, 'data/');
+
+if (process.env.QL_DATA_DIR) {
+  dataPath = process.env.QL_DATA_DIR.replace(/\/$/g, '');
+}
+
 const configPath = path.join(dataPath, 'config/');
 const scriptPath = path.join(dataPath, 'scripts/');
 const logPath = path.join(dataPath, 'log/');

back/public.ts

@@ -21,7 +21,7 @@ app.get('/api/health', (req, res) => {
 });
 
 app
-  .listen(config.publicPort, async () => {
+  .listen(config.publicPort, '0.0.0.0', async () => {
     await require('./loaders/sentry').default({ expressApp: app });
     await require('./loaders/db').default();
 

back/services/cron.ts

@@ -114,7 +114,13 @@ export default class CronService {
     }
 
     for (const id of ids) {
-      const cron = await this.getDb({ id });
+      let cron;
+      try {
+        cron = await this.getDb({ id });
+      } catch (err) {}
+      if (!cron) {
+        continue;
+      }
       if (status === CrontabStatus.idle && log_path !== cron.log_path) {
         options = omit(options, ['status', 'log_path', 'pid']);
       }
@@ -375,7 +381,10 @@ export default class CronService {
 
   public async getDb(query: FindOptions<Crontab>['where']): Promise<Crontab> {
     const doc: any = await CrontabModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as Crontab);
+    if (!doc) {
+      throw new Error(`Cron ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async run(ids: number[]) {
@@ -407,7 +416,7 @@ export default class CronService {
   }
 
   private async runSingle(cronId: number): Promise<number | void> {
-    return taskLimit.runWithCronLimit(() => {
+    return taskLimit.manualRunWithCronLimit(() => {
       return new Promise(async (resolve: any) => {
         const cron = await this.getDb({ id: cronId });
         const params = {
@@ -434,9 +443,11 @@ export default class CronService {
         }
         const logPath = `${uniqPath}/${logTime}.log`;
         const absolutePath = path.resolve(config.logPath, `${logPath}`);
-
         const cp = spawn(
-          `real_log_path=${logPath} no_delay=true ${this.makeCommand(cron)}`,
+          `real_log_path=${logPath} no_delay=true ${this.makeCommand(
+            cron,
+            true,
+          )}`,
           { shell: '/bin/bash' },
         );
 
@@ -444,11 +455,14 @@ export default class CronService {
           { status: CrontabStatus.running, pid: cp.pid, log_path: logPath },
           { where: { id } },
         );
+        cp.stdout.on('data', async (data) => {
+          await fs.appendFile(absolutePath, data.toString());
+        });
         cp.stderr.on('data', async (data) => {
-          await fs.appendFile(`${absolutePath}`, `${data.toString()}`);
+          await fs.appendFile(absolutePath, data.toString());
         });
         cp.on('error', async (err) => {
-          await fs.appendFile(`${absolutePath}`, `${JSON.stringify(err)}`);
+          await fs.appendFile(absolutePath, JSON.stringify(err));
         });
 
         cp.on('exit', async (code) => {
@@ -524,12 +538,14 @@ export default class CronService {
     }
   }
 
-  private makeCommand(tab: Crontab) {
+  private makeCommand(tab: Crontab, realTime?: boolean) {
     let command = tab.command.trim();
     if (!command.startsWith(TASK_PREFIX) && !command.startsWith(QL_PREFIX)) {
       command = `${TASK_PREFIX}${tab.command}`;
     }
-    let commandVariable = `no_tee=true ID=${tab.id} `;
+    let commandVariable = `real_time=${Boolean(realTime)} no_tee=true ID=${
+      tab.id
+    } `;
     if (tab.task_before) {
       commandVariable += `task_before='${tab.task_before
         .replace(/'/g, "'\\''")

back/services/cronView.ts

@@ -63,7 +63,10 @@ export default class CronViewService {
     query: FindOptions<CrontabView>['where'],
   ): Promise<CrontabView> {
     const doc: any = await CrontabViewModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as CrontabView);
+    if (!doc) {
+      throw new Error(`CronView ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async disabled(ids: number[]) {

back/services/dependence.ts

@@ -183,7 +183,10 @@ export default class DependenceService {
     query: FindOptions<Dependence>['where'],
   ): Promise<Dependence> {
     const doc: any = await DependenceModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as Dependence);
+    if (!doc) {
+      throw new Error(`Dependency ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   private async updateLog(ids: number[], log: string): Promise<void> {

back/services/env.ts

@@ -165,7 +165,10 @@ export default class EnvService {
 
   public async getDb(query: FindOptions<Env>['where']): Promise<Env> {
     const doc: any = await EnvModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as Env);
+    if (!doc) {
+      throw new Error(`Env ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async disabled(ids: string[]) {
@@ -193,6 +196,8 @@ export default class EnvService {
     });
     const groups = groupBy(envs, 'name');
     let env_string = '';
+    let js_env_string = '';
+    let py_env_string = 'import os\n';
     for (const key in groups) {
       if (Object.prototype.hasOwnProperty.call(groups, key)) {
         const group = groups[key];
@@ -205,9 +210,18 @@ export default class EnvService {
             .replace(/'/g, "'\\''")
             .trim();
           env_string += `export ${key}='${value}'\n`;
+          const _env_value = `'${group
+            .map((x) => x.value)
+            .join('&')
+            .replace(/\\/g, '\\\\')
+            .replace(/'/g, "\\'")}'`;
+          js_env_string += `process.env.${key}=${_env_value};\n`;
+          py_env_string += `os.environ['${key}']=${_env_value}\n`;
         }
       }
     }
     await fs.writeFile(config.envFile, env_string);
+    await fs.writeFile(config.jsEnvFile, js_env_string);
+    await fs.writeFile(config.pyEnvFile, py_env_string);
   }
 }

back/services/notify.ts

@@ -27,6 +27,7 @@ export default class NotificationService {
     ['aibotk', this.aibotk],
     ['iGot', this.iGot],
     ['pushPlus', this.pushPlus],
+    ['wePlusBot', this.wePlusBot],
     ['email', this.email],
     ['pushMe', this.pushMe],
     ['webhook', this.webhook],
@@ -196,22 +197,35 @@ export default class NotificationService {
   }
 
   private async bark() {
-    let { barkPush, barkIcon, barkSound, barkGroup, barkLevel, barkUrl } =
-      this.params;
+    let {
+      barkPush,
+      barkIcon = '',
+      barkSound = '',
+      barkGroup = '',
+      barkLevel = '',
+      barkUrl = '',
+      barkArchive = '',
+    } = this.params;
     if (!barkPush.startsWith('http')) {
       barkPush = `https://api.day.app/${barkPush}`;
     }
-    const url = `${barkPush}/${encodeURIComponent(
-      this.title,
-    )}/${encodeURIComponent(
-      this.content,
-    )}?icon=${barkIcon}&sound=${barkSound}&group=${barkGroup}&level=${barkLevel}&url=${barkUrl}`;
-
+    const url = `${barkPush}`;
+    const body = {
+      title: this.title,
+      body: this.content,
+      icon: barkIcon,
+      sound: barkSound,
+      group: barkGroup,
+      isArchive: barkArchive,
+      level: barkLevel,
+      url: barkUrl,
+    };
     try {
       const res: any = await got
-        .get(url, {
+        .post(url, {
           ...this.gotOption,
-          headers: { 'Content-Type': 'application/x-www-form-urlencoded' },
+          json: body,
+          headers: { 'Content-Type': 'application/json' },
         })
         .json();
       if (res.code === 200) {
@@ -507,6 +521,42 @@ export default class NotificationService {
     }
   }
 
+  private async wePlusBot() {
+    const { wePlusBotToken, wePlusBotReceiver, wePlusBotVersion } = this.params;
+
+    let content = this.content;
+    let template = 'txt';
+    if (this.content.length > 800) {
+      template = 'html';
+      content = content.replace(/[\n\r]/g, '<br>');
+    }
+
+    const url = `https://www.weplusbot.com/send`;
+    try {
+      const res: any = await got
+        .post(url, {
+          ...this.gotOption,
+          json: {
+            token: `${wePlusBotToken}`,
+            title: `${this.title}`,
+            template: `${template}`,
+            content: `${content}`,
+            receiver: `${wePlusBotReceiver || ''}`,
+            version: `${wePlusBotVersion || 'pro'}`,
+          },
+        })
+        .json();
+
+      if (res.code === 200) {
+        return true;
+      } else {
+        throw new Error(JSON.stringify(res));
+      }
+    } catch (error: any) {
+      throw new Error(error.response ? error.response.body : error);
+    }
+  }
+
   private async lark() {
     let { larkKey } = this.params;
 
@@ -567,19 +617,17 @@ export default class NotificationService {
   }
 
   private async pushMe() {
-    const { pushMeKey } = this.params;
+    const { pushMeKey, pushMeUrl } = this.params;
     try {
-      const res: any = await got.post(
-        `https://push.i-i.me/?push_key=${pushMeKey}`,
-        {
-          ...this.gotOption,
-          json: {
-            title: this.title,
-            content: this.content,
-          },
-          headers: { 'Content-Type': 'application/json' },
+      const res: any = await got.post(pushMeUrl || 'https://push.i-i.me/', {
+        ...this.gotOption,
+        json: {
+          push_key: pushMeKey,
+          title: this.title,
+          content: this.content,
         },
-      );
+        headers: { 'Content-Type': 'application/json' },
+      });
       if (res.body === 'success') {
         return true;
       } else {

back/services/open.ts

@@ -26,7 +26,7 @@ export default class OpenService {
 
   public async insert(payload: App): Promise<App> {
     const doc = await AppModel.create(payload, { returning: true });
-    return doc.get({ plain: true }) as App;
+    return doc.get({ plain: true });
   }
 
   public async update(payload: App): Promise<App> {
@@ -45,7 +45,10 @@ export default class OpenService {
 
   public async getDb(query: any): Promise<App> {
     const doc: any = await AppModel.findOne({ where: query });
-    return doc && (doc.get({ plain: true }) as App);
+    if (!doc) {
+      throw new Error(`App ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async remove(ids: number[]) {

back/services/schedule.ts

@@ -13,7 +13,7 @@ import taskLimit from '../shared/pLimit';
 import { spawn } from 'cross-spawn';
 
 export interface ScheduleTaskType {
-  id: number;
+  id?: number;
   command: string;
   name?: string;
   schedule?: string;

back/services/script.ts

@@ -41,7 +41,7 @@ export default class ScriptService {
     const relativePath = path.relative(config.scriptPath, filePath);
     const command = `${TASK_COMMAND} ${relativePath} now`;
     const pid = await this.scheduleService.runTask(
-      command,
+      `real_time=true ${command}`,
       this.taskCallbacks(filePath),
       { command },
       'start',
@@ -63,7 +63,10 @@ export default class ScriptService {
   }
 
   public async getFile(filePath: string, fileName: string) {
-    const _filePath = join(config.scriptPath, filePath, fileName);
+    let _filePath = join(config.scriptPath, filePath, fileName);
+    if (filePath.startsWith(config.dataPath)) {
+      _filePath = join(filePath, fileName);
+    }
     const content = await getFileContentByName(_filePath);
     return content;
   }

back/services/subscription.ts

@@ -91,9 +91,9 @@ export default class SubscriptionService {
           this.taskCallbacks(doc),
           runImmediately,
         ));
-    } else {
+    } else if (doc.interval_schedule) {
       this.scheduleService.cancelIntervalTask(doc as any);
-      const { type, value } = doc.interval_schedule as any;
+      const { type, value } = doc.interval_schedule;
       needCreate &&
         (await this.scheduleService.createIntervalTask(
           doc as any,
@@ -256,7 +256,7 @@ export default class SubscriptionService {
     );
   }
 
-  public async remove(ids: number[], query: any) {
+  public async remove(ids: number[], query: { force?: boolean }) {
     const docs = await SubscriptionModel.findAll({ where: { id: ids } });
     for (const doc of docs) {
       await this.handleTask(doc, false);
@@ -279,8 +279,11 @@ export default class SubscriptionService {
   public async getDb(
     query: FindOptions<Subscription>['where'],
   ): Promise<Subscription> {
-    const doc: any = await SubscriptionModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as Subscription);
+    const doc = await SubscriptionModel.findOne({ where: { ...query } });
+    if (!doc) {
+      throw new Error(`Subscription ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async run(ids: number[]) {

back/services/system.ts

@@ -24,7 +24,7 @@ import {
 import { NotificationInfo } from '../data/notify';
 import {
   AuthDataType,
-  AuthInfo,
+  SystemInfo,
   SystemInstance,
   SystemModel,
   SystemModelInfo,
@@ -47,18 +47,21 @@ export default class SystemService {
 
   public async getSystemConfig() {
     const doc = await this.getDb({ type: AuthDataType.systemConfig });
-    return doc || ({} as SystemInstance);
+    return doc;
   }
 
-  private async updateAuthDb(payload: AuthInfo): Promise<SystemInstance> {
+  private async updateAuthDb(payload: SystemInfo): Promise<SystemInfo> {
     await SystemModel.upsert({ ...payload });
     const doc = await this.getDb({ type: payload.type });
     return doc;
   }
 
-  public async getDb(query: any): Promise<SystemInstance> {
-    const doc: any = await SystemModel.findOne({ where: { ...query } });
-    return doc && doc.get({ plain: true });
+  public async getDb(query: any): Promise<SystemInfo> {
+    const doc = await SystemModel.findOne({ where: { ...query } });
+    if (!doc) {
+      throw new Error(`System ${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async updateNotificationMode(notificationInfo: NotificationInfo) {
@@ -348,20 +351,13 @@ export default class SystemService {
     }
   }
 
-  public async run(
-    { command, logPath }: { command: string; logPath: string },
-    callback: TaskCallbacks,
-  ) {
+  public async run({ command }: { command: string }, callback: TaskCallbacks) {
     if (!command.startsWith(TASK_COMMAND)) {
       command = `${TASK_COMMAND} ${command}`;
     }
-    this.scheduleService.runTask(
-      `real_log_path=${logPath} real_time=true ${command}`,
-      callback,
-      {
-        command,
-      },
-    );
+    this.scheduleService.runTask(`real_time=true ${command}`, callback, {
+      command,
+    });
   }
 
   public async stop({ command, pid }: { command: string; pid: number }) {
@@ -388,7 +384,9 @@ export default class SystemService {
 
   public async exportData(res: Response) {
     try {
-      await promiseExec(`cd ${config.rootPath} && tar -zcvf ${config.dataTgzFile} data/`);
+      await promiseExec(
+        `cd ${config.rootPath} && tar -zcvf ${config.dataTgzFile} data/`,
+      );
       res.download(config.dataTgzFile);
     } catch (error: any) {
       return res.send({ code: 400, message: error.message });

back/services/user.ts

@@ -1,6 +1,7 @@
 import { Service, Inject } from 'typedi';
 import winston from 'winston';
 import {
+  createFile,
   createRandomString,
   fileExist,
   getNetIp,
@@ -13,7 +14,7 @@ import jwt from 'jsonwebtoken';
 import { authenticator } from '@otplib/preset-default';
 import {
   AuthDataType,
-  AuthInfo,
+  SystemInfo,
   SystemModel,
   SystemModelInfo,
   LoginStatus,
@@ -223,7 +224,7 @@ export default class UserService {
     return [];
   }
 
-  private async insertDb(payload: AuthInfo): Promise<AuthInfo> {
+  private async insertDb(payload: SystemInfo): Promise<SystemInfo> {
     const doc = await SystemModel.create({ ...payload }, { returning: true });
     return doc;
   }
@@ -266,7 +267,7 @@ export default class UserService {
   public async getUserInfo(): Promise<any> {
     const authFileExist = await fileExist(config.authConfigFile);
     if (!authFileExist) {
-      await fs.writeFile(
+      await createFile(
         config.authConfigFile,
         JSON.stringify({
           username: 'admin',
@@ -351,10 +352,10 @@ export default class UserService {
 
   public async getNotificationMode(): Promise<NotificationInfo> {
     const doc = await this.getDb({ type: AuthDataType.notification });
-    return (doc && doc.info) || {};
+    return (doc.info || {}) as NotificationInfo;
   }
 
-  private async updateAuthDb(payload: AuthInfo): Promise<any> {
+  private async updateAuthDb(payload: SystemInfo): Promise<any> {
     let doc = await SystemModel.findOne({ type: payload.type });
     if (doc) {
       const updateResult = await SystemModel.update(payload, {
@@ -368,9 +369,12 @@ export default class UserService {
     return doc;
   }
 
-  public async getDb(query: any): Promise<any> {
-    const doc: any = await SystemModel.findOne({ where: { ...query } });
-    return doc && (doc.get({ plain: true }) as any);
+  public async getDb(query: any): Promise<SystemInfo> {
+    const doc = await SystemModel.findOne({ where: { ...query } });
+    if (!doc) {
+      throw new Error(`${JSON.stringify(query)} not found`);
+    }
+    return doc.get({ plain: true });
   }
 
   public async updateNotificationMode(notificationInfo: NotificationInfo) {

back/shared/pLimit.ts

@@ -15,6 +15,9 @@ class TaskLimit {
   private cronLimit = new PQueue({
     concurrency: Math.max(os.cpus().length, 4),
   });
+  private manualCronoLimit = new PQueue({
+    concurrency: Math.max(os.cpus().length, 4),
+  });
 
   get cronLimitActiveCount() {
     return this.cronLimit.pending;
@@ -71,6 +74,7 @@ class TaskLimit {
   public async setCustomLimit(limit?: number) {
     if (limit) {
       this.cronLimit.concurrency = limit;
+      this.manualCronoLimit.concurrency = limit;
       return;
     }
     await SystemModel.sync();
@@ -79,6 +83,7 @@ class TaskLimit {
     });
     if (doc?.info?.cronConcurrency) {
       this.cronLimit.concurrency = doc.info.cronConcurrency;
+      this.manualCronoLimit.concurrency = doc.info.cronConcurrency;
     }
   }
 
@@ -89,6 +94,13 @@ class TaskLimit {
     return this.cronLimit.add(fn, options);
   }
 
+  public async manualRunWithCronLimit<T>(
+    fn: () => Promise<T>,
+    options?: Partial<QueueAddOptions>,
+  ): Promise<T | void> {
+    return this.manualCronoLimit.add(fn, options);
+  }
+
   public runDependeny<T>(
     dependency: Dependence,
     fn: IDependencyFn<T>,

back/update.ts

@@ -12,7 +12,7 @@ async function startServer() {
   await require('./loaders/update').default({ app });
 
   app
-    .listen(config.updatePort, () => {
+    .listen(config.updatePort, '0.0.0.0', () => {
       Logger.debug(`✌️ 更新服务启动成功！`);
       console.debug(`✌️ 更新服务启动成功！`);
       process.send?.('ready');

docker/docker-entrypoint.sh

@@ -3,7 +3,6 @@
 dir_shell=/ql/shell
 . $dir_shell/env.sh
 . $dir_shell/share.sh
-link_shell
 
 echo -e "======================1. 检测配置文件========================\n"
 make_dir /etc/nginx/conf.d

package.json

@@ -85,7 +85,7 @@
     "node-schedule": "^2.1.0",
     "nodemailer": "^6.7.2",
     "p-queue-cjs": "7.3.4",
-    "protobufjs": "^7.2.3",
+    "protobufjs": "^7.3.0",
     "pstree.remy": "^1.1.8",
     "reflect-metadata": "^0.1.13",
     "sequelize": "^6.25.5",

pnpm-lock.yaml

@@ -1,5 +1,9 @@
 lockfileVersion: '6.0'
 
+settings:
+  autoInstallPeers: true
+  excludeLinksFromLockfile: false
+
 dependencies:
   '@grpc/grpc-js':
     specifier: ^1.8.13
@@ -89,8 +93,8 @@ dependencies:
     specifier: 7.3.4
     version: 7.3.4
   protobufjs:
-    specifier: ^7.2.3
-    version: 7.2.3
+    specifier: ^7.3.0
+    version: 7.3.0
   pstree.remy:
     specifier: ^1.1.8
     version: 1.1.8
@@ -3930,7 +3934,7 @@ packages:
       '@types/long': 4.0.2
       lodash.camelcase: 4.3.0
       long: 4.0.0
-      protobufjs: 7.2.3
+      protobufjs: 7.3.0
       yargs: 17.7.2
     dev: false
 
@@ -7386,7 +7390,7 @@ packages:
       normalize-path: 3.0.0
       readdirp: 3.6.0
     optionalDependencies:
-      fsevents: 2.3.2
+      fsevents: 2.3.3
 
   /chownr@2.0.0:
     resolution: {integrity: sha512-bIomtDF5KGpdogkLd9VspvFzk9KfpyyGlS8YFVZl7TGPBHL5snIOnxeshwVgPteQ9b4Eydl+pVbIyE1DcvCWgQ==}
@@ -9360,19 +9364,11 @@ packages:
     resolution: {integrity: sha512-OO0pH2lK6a0hZnAdau5ItzHPI6pUlvI7jMVnxUQRtw4owF2wk8lOSabtGDCTP4Ggrg2MbGnWO9X8K1t4+fGMDw==}
     requiresBuild: true
 
-  /fsevents@2.3.2:
-    resolution: {integrity: sha512-xiqMQR4xAeHTuB9uWm+fFRcIOgKBMiOBP+eXiyT7jsgVCq1bkVygt00oASowB7EdtpOHaaPgKt812P9ab+DDKA==}
-    engines: {node: ^8.16.0 || ^10.6.0 || >=11.0.0}
-    os: [darwin]
-    requiresBuild: true
-    optional: true
-
   /fsevents@2.3.3:
     resolution: {integrity: sha512-5xoDfX+fL7faATnagmWPpbFtwh/R77WmMMqqHGS65C3vvB0YHrgF+B1YmZ3441tMj5n63k0212XNoJwzlhffQw==}
     engines: {node: ^8.16.0 || ^10.6.0 || >=11.0.0}
     os: [darwin]
     requiresBuild: true
-    dev: true
     optional: true
 
   /ftp@0.3.10:
@@ -12834,8 +12830,8 @@ packages:
       long: 4.0.0
     dev: true
 
-  /protobufjs@7.2.3:
-    resolution: {integrity: sha512-TtpvOqwB5Gdz/PQmOjgsrGH1nHjAQVCN7JG4A6r1sXRWESL5rNMAiRcBQlCAdKxZcAbstExQePYG8xof/JVRgg==}
+  /protobufjs@7.3.0:
+    resolution: {integrity: sha512-YWD03n3shzV9ImZRX3ccbjqLxj7NokGN0V/ESiBV5xWqrommYHYiihuIyavq03pWSGqlyvYUFmfoMKd+1rPA/g==}
     engines: {node: '>=12.0.0'}
     requiresBuild: true
     dependencies:
@@ -16673,7 +16669,3 @@ packages:
       - encoding
       - supports-color
     dev: false
-
-settings:
-  autoInstallPeers: true
-  excludeLinksFromLockfile: false

sample/config.sample.sh

@@ -56,6 +56,12 @@ export BARK_ICON="https://qn.whyour.cn/logo.png"
 export BARK_SOUND=""
 ## 下方填写推送消息分组，默认为"QingLong"
 export BARK_GROUP="QingLong"
+## bark 推送时效性
+export BARK_LEVEL="active"
+## bark 推送是否存档
+export BARK_ARCHIVE=""
+## bark 推送跳转 URL
+export BARK_URL=""
 
 ## 3. Telegram
 ## 下方填写自己申请@BotFather的Token，如10xxx4:AAFcqxxxxgER5uw
@@ -112,7 +118,18 @@ export PUSH_PLUS_TOKEN=""
 ## 1. 需订阅者扫描二维码 2、如果您是创建群组所属人，也需点击“查看二维码”扫描绑定，否则不能接受群组消息推送
 export PUSH_PLUS_USER=""
 
-## 9. go-cqhttp
+## 9. 微加机器人
+## 官方网站：http://www.weplusbot.com
+## 下方填写您的Token；微信扫描登录后在"我的"->"设置"->"令牌"中获取
+export WE_PLUS_BOT_TOKEN=""
+## 消息接收人；
+## 个人版填写接收消息的群编码，不填发送给自己的微信号
+## 专业版不填默认发给机器人自己，发送给好友填写wxid，发送给微信群填写群编码
+export WE_PLUS_BOT_RECEIVER=""
+## 调用版本；分为专业版和个人版，专业版填写pro，个人版填写personal
+export WE_PLUS_BOT_VERSION="pro"
+
+## 10. go-cqhttp
 ## gobot_url 推送到个人QQ: http://127.0.0.1/send_private_msg  群：http://127.0.0.1/send_group_msg
 ## gobot_token 填写在go-cqhttp文件设置的访问密钥
 ## gobot_qq 如果GOBOT_URL设置 /send_private_msg 则需要填入 user_id=个人QQ 相反如果是 /send_group_msg 则需要填入 group_id=QQ群
@@ -121,7 +138,7 @@ export GOBOT_URL=""
 export GOBOT_TOKEN=""
 export GOBOT_QQ=""
 
-## 10. gotify
+## 11. gotify
 ## gotify_url 填写gotify地址,如https://push.example.de:8080
 ## gotify_token 填写gotify的消息应用token
 ## gotify_priority 填写推送消息优先级,默认为0
@@ -129,17 +146,17 @@ export GOTIFY_URL=""
 export GOTIFY_TOKEN=""
 export GOTIFY_PRIORITY=0
 
-## 11. PushDeer
+## 12. PushDeer
 ## deer_key 填写PushDeer的key
 export DEER_KEY=""
 
-## 12. Chat
+## 13. Chat
 ## chat_url 填写synology chat地址，http://IP:PORT/webapi/***token=
 ## chat_token 填写后面的token
 export CHAT_URL=""
 export CHAT_TOKEN=""
 
-## 13. aibotk
+## 14. aibotk
 ## 官方说明文档：http://wechat.aibotk.com/oapi/oapi?from=ql
 ## aibotk_key (必填)填写智能微秘书个人中心的apikey
 export AIBOTK_KEY=""
@@ -148,7 +165,7 @@ export AIBOTK_TYPE=""
 ## aibotk_name (必填)填写群名或用户昵称，和上面的type类型要对应
 export AIBOTK_NAME=""
 
-## 13. CHRONOCAT
+## 15. CHRONOCAT
 ## CHRONOCAT_URL 推送 http://127.0.0.1:16530
 ## CHRONOCAT_TOKEN 填写在CHRONOCAT文件生成的访问密钥
 ## CHRONOCAT_QQ 个人:user_id=个人QQ 群则填入group_id=QQ群 多个用英文;隔开同时支持个人和群 如：user_id=xxx;group_id=xxxx;group_id=xxxxx
@@ -157,7 +174,7 @@ export CHRONOCAT_URL=""
 export CHRONOCAT_QQ=""
 export CHRONOCAT_TOKEN=""
 
-## 14. SMTP
+## 16. SMTP
 ## 邮箱服务名称，比如126、163、Gmail、QQ等，支持列表 https://github.com/nodemailer/nodemailer/blob/master/lib/well-known/services.json
 export SMTP_SERVICE=""
 ## smtp_email 填写 SMTP 收发件邮箱，通知将会由自己发给自己
@@ -167,12 +184,26 @@ export SMTP_PASSWORD=""
 ## smtp_name 填写 SMTP 收发件人姓名，可随意填写
 export SMTP_NAME=""
 
-## 15. PushMe
+## 17. PushMe
 ## 官方说明文档：https://push.i-i.me/
 ## PUSHME_KEY (必填)填写PushMe APP上获取的push_key
+## PUSHME_URL (选填)填写自建的PushMeServer消息服务接口地址，例如：http://127.0.0.1:3010，不填则使用官方接口服务
 export PUSHME_KEY=""
+export PUSHME_URL=""
 
-## 15. 自定义通知
+## 18. 飞书机器人
+## 官方文档：https://www.feishu.cn/hc/zh-CN/articles/360024984973
+## FSKEY 飞书机器人的 FSKEY
+export FSKEY=""
+
+## 19. Qmsg酱
+## 官方文档：https://qmsg.zendee.cn/docs/api/
+## qmsg 酱的 QMSG_KEY
+## qmsg 酱的 QMSG_TYPE send 为私聊，group 为群聊
+export QMSG_KEY=""
+export QMSG_TYPE=""
+
+## 20. 自定义通知
 ## 自定义通知 接收回调的URL
 export WEBHOOK_URL=""
 ## WEBHOOK_BODY 和 WEBHOOK_HEADERS 多个参数时，直接换行或者使用 $'\n' 连接多行字符串，比如 export dd="line 1"$'\n'"line 2"

sample/notify.py

@@ -33,7 +33,7 @@ def print(text, *args, **kw):
 # 通知服务
 # fmt: off
 push_config = {
-    'HITOKOTO': False,                  # 启用一言（随机句子）
+    'HITOKOTO': True,                  # 启用一言（随机句子）
 
     'BARK_PUSH': '',                    # bark IP 或设备码，例：https://api.day.app/DxHcxxxxxRxxxxxxcm/
     'BARK_ARCHIVE': '',                 # bark 推送是否存档
@@ -43,7 +43,7 @@ push_config = {
     'BARK_LEVEL': '',                   # bark 推送时效性
     'BARK_URL': '',                     # bark 推送跳转URL
 
-    'CONSOLE': True,                    # 控制台输出
+    'CONSOLE': False,                    # 控制台输出
 
     'DD_BOT_SECRET': '',                # 钉钉机器人的 DD_BOT_SECRET
     'DD_BOT_TOKEN': '',                 # 钉钉机器人的 DD_BOT_TOKEN
@@ -75,6 +75,10 @@ push_config = {
     'PUSH_PLUS_TOKEN': '',              # push+ 微信推送的用户令牌
     'PUSH_PLUS_USER': '',               # push+ 微信推送的群组编码
 
+    'WE_PLUS_BOT_TOKEN': '',            # 微加机器人的用户令牌
+    'WE_PLUS_BOT_RECEIVER': '',         # 微加机器人的消息接收者
+    'WE_PLUS_BOT_VERSION': 'pro',          # 微加机器人的调用版本
+
     'QMSG_KEY': '',                     # qmsg 酱的 QMSG_KEY
     'QMSG_TYPE': '',                    # qmsg 酱的 QMSG_TYPE
 
@@ -101,7 +105,8 @@ push_config = {
     'SMTP_PASSWORD': '',                # SMTP 登录密码，也可能为特殊口令，视具体邮件服务商说明而定
     'SMTP_NAME': '',                    # SMTP 收发件人姓名，可随意填写
 
-    'PUSHME_KEY': '',                   # PushMe 酱的 PUSHME_KEY
+    'PUSHME_KEY': '',                   # PushMe 的 PUSHME_KEY
+    'PUSHME_URL': '',                   # PushMe 的 PUSHME_URL
 
     'CHRONOCAT_QQ': '',                 # qq号
     'CHRONOCAT_TOKEN': '',              # CHRONOCAT 的token
@@ -115,7 +120,6 @@ push_config = {
 }
 # fmt: on
 
-# 首先读取 面板变量 或者 github action 运行变量
 for k in push_config:
     if os.getenv(k):
         v = os.getenv(k)
@@ -132,9 +136,9 @@ def bark(title: str, content: str) -> None:
     print("bark 服务启动")
 
     if push_config.get("BARK_PUSH").startswith("http"):
-        url = f'{push_config.get("BARK_PUSH")}/{urllib.parse.quote_plus(title)}/{urllib.parse.quote_plus(content)}'
+        url = f'{push_config.get("BARK_PUSH")}'
     else:
-        url = f'https://api.day.app/{push_config.get("BARK_PUSH")}/{urllib.parse.quote_plus(title)}/{urllib.parse.quote_plus(content)}'
+        url = f'https://api.day.app/{push_config.get("BARK_PUSH")}'
 
     bark_params = {
         "BARK_ARCHIVE": "isArchive",
@@ -144,7 +148,10 @@ def bark(title: str, content: str) -> None:
         "BARK_LEVEL": "level",
         "BARK_URL": "url",
     }
-    params = ""
+    data = {
+        "title": title,
+        "body": content,
+    }
     for pair in filter(
         lambda pairs: pairs[0].startswith("BARK_")
         and pairs[0] != "BARK_PUSH"
@@ -152,10 +159,11 @@ def bark(title: str, content: str) -> None:
         and bark_params.get(pairs[0]),
         push_config.items(),
     ):
-        params += f"{bark_params.get(pair[0])}={pair[1]}&"
-    if params:
-        url = url + "?" + params.rstrip("&")
-    response = requests.get(url).json()
+        data[bark_params.get(pair[0])] = pair[1]
+    headers = {"Content-Type": "application/json;charset=utf-8"}
+    response = requests.post(
+        url=url, data=json.dumps(data), headers=headers, timeout=15
+    ).json()
 
     if response["code"] == 200:
         print("bark 推送成功！")
@@ -381,6 +389,38 @@ def pushplus_bot(title: str, content: str) -> None:
             print("PUSHPLUS 推送失败！")
 
 
+def weplus_bot(title: str, content: str) -> None:
+    """
+    通过 微加机器人 推送消息。
+    """
+    if not push_config.get("WE_PLUS_BOT_TOKEN"):
+        print("微加机器人 服务的 WE_PLUS_BOT_TOKEN 未设置!!\n取消推送")
+        return
+    print("微加机器人 服务启动")
+
+    template = "txt"
+    if len(content) > 800:
+        template = "html"
+
+    url = "https://www.weplusbot.com/send"
+    data = {
+        "token": push_config.get("WE_PLUS_BOT_TOKEN"),
+        "title": title,
+        "content": content,
+        "template": template,
+        "receiver": push_config.get("WE_PLUS_BOT_RECEIVER"),
+        "version": push_config.get("WE_PLUS_BOT_VERSION"),
+    }
+    body = json.dumps(data).encode(encoding="utf-8")
+    headers = {"Content-Type": "application/json"}
+    response = requests.post(url=url, data=body, headers=headers).json()
+
+    if response["code"] == 200:
+        print("微加机器人 推送成功！")
+    else:
+        print("微加机器人 推送失败！")
+
+
 def qmsg_bot(title: str, content: str) -> None:
     """
     使用 qmsg 推送消息。
@@ -668,10 +708,17 @@ def pushme(title: str, content: str) -> None:
         return
     print("PushMe 服务启动")
 
-    url = f'https://push.i-i.me/?push_key={push_config.get("PUSHME_KEY")}'
+    url = (
+        push_config.get("PUSHME_URL")
+        if push_config.get("PUSHME_URL")
+        else "https://push.i-i.me/"
+    )
     data = {
+        "push_key": push_config.get("PUSHME_KEY"),
         "title": title,
         "content": content,
+        "date": push_config.get("date") if push_config.get("date") else "",
+        "type": push_config.get("type") if push_config.get("type") else "",
     }
     response = requests.post(url, data=data)
 
@@ -854,6 +901,8 @@ def add_notify_function():
         notify_function.append(chat)
     if push_config.get("PUSH_PLUS_TOKEN"):
         notify_function.append(pushplus_bot)
+    if push_config.get("WE_PLUS_BOT_TOKEN"):
+        notify_function.append(weplus_bot)
     if push_config.get("QMSG_KEY") and push_config.get("QMSG_TYPE"):
         notify_function.append(qmsg_bot)
     if push_config.get("QYWX_AM"):
@@ -912,7 +961,7 @@ def send(title: str, content: str, ignore_default_config: bool = False, **kwargs
             return
 
     hitokoto = push_config.get("HITOKOTO")
-    content += "\n\n" + one() if hitokoto else ""
+    content += "\n\n" + one() if hitokoto != "false" else ""
 
     notify_function = add_notify_function()
     ts = [

sample/ql_sample.js

@@ -0,0 +1,11 @@
+/**
+ * 任务名称
+ * name: script name
+ * 定时规则
+ * cron: 1 9 * * *
+ */
+const { sendNotify } = require('./sendNotify.js'); // commonjs
+// import { sendNotify } from './sendNotify'; // es6
+
+console.log('test scripts');
+sendNotify('test scripts', 'test desc');

sample/ql_sample.py

@@ -4,5 +4,7 @@ name: script name
 定时规则
 cron: 1 9 * * *
 """
+import notify
 
 print("test script")
+notify.send('test script', 'test desc')

sample/test.js

@@ -1,8 +0,0 @@
-/**
- * 任务名称
- * name: script name
- * 定时规则
- * cron: 1 9 * * *
- */
-
-console.log('test scripts');

shell/share.sh

@@ -4,6 +4,11 @@
 dir_root=$QL_DIR
 dir_tmp=$dir_root/.tmp
 dir_data=$dir_root/data
+
+if [[ $QL_DATA_DIR ]]; then
+  dir_data="${QL_DATA_DIR%/}"
+fi
+
 dir_shell=$dir_root/shell
 dir_sample=$dir_root/sample
 dir_static=$dir_root/static
@@ -33,12 +38,12 @@ file_task_sample=$dir_sample/task.sample.sh
 file_extra_sample=$dir_sample/extra.sample.sh
 file_notify_js_sample=$dir_sample/notify.js
 file_notify_py_sample=$dir_sample/notify.py
-file_test_js_sample=$dir_sample/test.js
-file_test_py_sample=$dir_sample/test.py
+file_test_js_sample=$dir_sample/ql_sample.js
+file_test_py_sample=$dir_sample/ql_sample.py
 file_notify_py=$dir_scripts/notify.py
 file_notify_js=$dir_scripts/sendNotify.js
-file_test_js=$dir_scripts/test.js
-file_test_py=$dir_scripts/test.py
+file_test_js=$dir_scripts/ql_sample.js
+file_test_py=$dir_scripts/ql_sample.py
 nginx_app_conf=$dir_root/docker/front.conf
 nginx_conf=$dir_root/docker/nginx.conf
 dep_notify_py=$dir_dep/notify.py
@@ -69,7 +74,9 @@ init_env() {
 
 import_config() {
   [[ -f $file_config_user ]] && . $file_config_user
-  [[ -f $file_env ]] && . $file_env
+  if [[ $LOAD_ENV != 'false' ]] && [[ -f $file_env ]]; then
+    . $file_env
+  fi
 
   ql_base_url=${QlBaseUrl:-"/"}
   ql_port=${QlPort:-"5700"}
@@ -129,31 +136,6 @@ gen_random_num() {
   echo $((${RANDOM} % $divi))
 }
 
-link_shell_sub() {
-  local link_path="$1"
-  local original_path="$2"
-  if [[ ! -L $link_path ]] || [[ $(readlink -f $link_path) != $original_path ]]; then
-    rm -f $link_path 2>/dev/null
-    ln -sf $original_path $link_path
-  fi
-}
-
-link_shell() {
-  if [[ $is_termux -eq 1 ]]; then
-    local path="/data/data/com.termux/files/usr/bin/"
-  elif [[ $PATH == */usr/local/bin* ]] && [[ -d /usr/local/bin ]]; then
-    local path="/usr/local/bin/"
-  else
-    local path=""
-    echo -e "脚本功能受限，请自行添加命令的软连接...\n"
-  fi
-  if [[ $path ]]; then
-    for ((i = 0; i < ${#link_name[*]}; i++)); do
-      link_shell_sub "$path${link_name[i]}" "$dir_shell/${original_name[i]}"
-    done
-  fi
-}
-
 define_cmd() {
   local cmd_prefix cmd_suffix
   if type task &>/dev/null; then
@@ -396,25 +378,25 @@ patch_version() {
 
   if [[ -d "$dir_root/db" ]]; then
     echo -e "检测到旧的db目录，拷贝到data目录...\n"
-    cp -rf $dir_root/config $dir_root/data
+    cp -rf $dir_root/config $dir_data
     echo
   fi
 
   if [[ -d "$dir_root/scripts" ]]; then
     echo -e "检测到旧的scripts目录，拷贝到data目录...\n"
-    cp -rf $dir_root/scripts $dir_root/data
+    cp -rf $dir_root/scripts $dir_data
     echo
   fi
 
   if [[ -d "$dir_root/log" ]]; then
     echo -e "检测到旧的log目录，拷贝到data目录...\n"
-    cp -rf $dir_root/log $dir_root/data
+    cp -rf $dir_root/log $dir_data
     echo
   fi
 
   if [[ -d "$dir_root/config" ]]; then
     echo -e "检测到旧的config目录，拷贝到data目录...\n"
-    cp -rf $dir_root/config $dir_root/data
+    cp -rf $dir_root/config $dir_data
     echo
   fi
 }

shell/update.sh

@@ -156,21 +156,15 @@ update_raw() {
     autoDelCron=${AutoDelCron}
   fi
 
-  local proxyStr=""
-  if [[ $proxy ]]; then
-    if [[ $url == http:* ]]; then
-      proxyStr="-e \"http_proxy=${proxy}\""
-    elif [[ $url == https:* ]]; then
-      proxyStr="-e \"http_proxy=${proxy};https_proxy=${proxy}\""
-    fi
-  fi
-
   local raw_url="$url"
   local suffix="${raw_url##*.}"
   local raw_file_name="${uniq_path}.${suffix}"
   echo -e "开始下载：${raw_url} \n\n保存路径：$dir_raw/${raw_file_name}\n"
 
-  wget -q --no-check-certificate $proxyStr -O "$dir_raw/${raw_file_name}.new" ${raw_url}
+  set_proxy "$proxy"
+  wget -q --no-check-certificate -O "$dir_raw/${raw_file_name}.new" ${raw_url}
+  exit_status=$?
+  unset_proxy
 
   if [[ $? -eq 0 ]]; then
     mv "$dir_raw/${raw_file_name}.new" "$dir_raw/${raw_file_name}"
@@ -248,14 +242,14 @@ reload_qinglong() {
   fi
 
   if [[ "$reload_target" == 'data' ]]; then
-    rm -rf ${dir_root}/data/*
-    mv -f ${dir_tmp}/data/* ${dir_root}/data/
+    rm -rf ${dir_data}/*
+    mv -f ${dir_tmp}/data/* ${dir_data}/
   fi
 
   reload_pm2
 }
 
-## 更新qinglong
+## 更新 qinglong
 update_qinglong() {
   rm -rf ${dir_tmp}/*
   local mirror="gitee"
@@ -527,7 +521,7 @@ main() {
   raw)
     get_uniq_path "$p2"
     if [[ -n $p2 ]]; then
-      update_raw "$p2" "$p3" "$p4"
+      update_raw "$p2" "$p3" "$p4" "$p5"
     else
       eval echo -e "命令输入错误...\\\n" $cmd
       eval usage $cmd

src/locales/en-US.json

@@ -336,6 +336,7 @@
   "企业微信应用": "WeChat Work App",
   "智能微秘书": "Smart WeChat Assistant",
   "群晖chat": "Synology Chat",
+  "微加机器人": "WePlusBot",
   "邮箱": "Email",
   "飞书机器人": "Feishu Bot",
   "自定义通知": "Custom Notification",
@@ -357,6 +358,7 @@
   "BARK推送消息的分组，默认为qinglong": "BARK push message grouping, default is qinglong",
   "BARK推送消息的时效性，默认为active": "BARK push message redirecting URL",
   "BARK推送消息的跳转URL": "BARK push message grouping, default is qinglong",
+  "BARK是否保存推送消息": "Does BARK save push messages",
   "telegram机器人的token，例如：1077xxx4424:AAFjv0FcqxxxxxxgEMGfi22B4yh15R5uw": "Telegram Bot token, e.g., 1077xxx4424:AAFjv0FcqxxxxxxgEMGfi22B4yh15R5uw",
   "telegram用户的id，例如：129xxx206": "Telegram user ID, e.g., 129xxx206",
   "代理IP": "Proxy IP",
@@ -377,11 +379,15 @@
   "iGot的信息推送key，例如：https://push.hellyw.com/XXXXXXXX": "iGot information push key, e.g., https://push.hellyw.com/XXXXXXXX",
   "微信扫码登录后一对一推送或一对多推送下面的token(您的Token)，不提供PUSH_PLUS_USER则默认为一对一推送，参考 https://www.pushplus.plus/": "After WeChat scan login, one-to-one or one-to-many push using the provided token (your Token). If PUSH_PLUS_USER is not provided, it defaults to one-to-one push. See reference at https://www.pushplus.plus/",
   "一对多推送的“群组编码”（一对多推送下面->您的群组(如无则创建)->群组编码，如果您是创建群组人。也需点击“查看二维码”扫描绑定，否则不能接受群组消息推送）": "The 'group code' for one-to-many push (one-to-many push -> your group (if none, create one) -> group code). If you are the creator of the group, you need to click 'View QR code' to scan and bind, otherwise, you won't receive group messages.",
+  "用户令牌，扫描登录后 我的—>设置->令牌 中获取，参考 https://www.weplusbot.com/": "Token, which can be obtained after scanning and logging in, is available under 'My Account' -> 'Settings' -> 'Tokens'. Please refer to the instructions for detailed steps: https://www.weplusbot.com/",
+  "消息接收人": "message recipient",
+  "调用版本；专业版填写pro，个人版填写personal，为空默认使用专业版": "Version, you can specify 'pro' for the Professional version and 'personal' for the Personal version. If left blank, it will default to the Professional version.",
   "飞书群组机器人：https://www.feishu.cn/hc/zh-CN/articles/360024984973": "Feishu group bot: https://www.feishu.cn/hc/zh-CN/articles/360024984973",
   "邮箱服务名称，比如126、163、Gmail、QQ等，支持列表https://github.com/nodemailer/nodemailer/blob/master/lib/well-known/services.json": "Email service name, e.g., 126, 163, Gmail, QQ, etc. Supported list: https://github.com/nodemailer/nodemailer/blob/master/lib/well-known/services.json",
   "邮箱地址": "Email Address",
   "SMTP 登录密码，也可能为特殊口令，视具体邮件服务商说明而定": "The SMTP login password may also be a special passphrase, depending on the specific email service provider's instructions",
   "PushMe的Key，https://push.i-i.me/": "PushMe key, https://push.i-i.me/",
+  "自建的PushMeServer消息接口地址，例如：http://127.0.0.1:3010，不填则使用官方消息接口": "The self built PushMeServer message interface address, for example: http://127.0.0.1:3010 If left blank, use the official message interface",
   "请求方法": "Request Method",
   "请求头Content-Type": "Request Header Content-Type",
   "请求链接以http或者https开头。url或者body中必须包含$title，$content可选，对应api内容的位置": "Request URL should start with http or https. URL or body must contain $title, $content is optional and corresponds to the API content position.",

src/locales/zh-CN.json

@@ -336,6 +336,7 @@
   "企业微信应用": "企业微信应用",
   "智能微秘书": "智能微秘书",
   "群晖chat": "群晖chat",
+  "微加机器人": "微加机器人",
   "邮箱": "邮箱",
   "飞书机器人": "飞书机器人",
   "自定义通知": "自定义通知",
@@ -357,6 +358,7 @@
   "BARK推送消息的分组，默认为qinglong": "BARK推送消息的分组，默认为qinglong",
   "BARK推送消息的时效性，默认为active": "BARK推送消息的时效性，默认为active",
   "BARK推送消息的跳转URL": "BARK推送消息的跳转URL",
+  "BARK是否保存推送消息": "BARK是否保存推送消息",
   "telegram机器人的token，例如：1077xxx4424:AAFjv0FcqxxxxxxgEMGfi22B4yh15R5uw": "telegram机器人的token，例如：1077xxx4424:AAFjv0FcqxxxxxxgEMGfi22B4yh15R5uw",
   "telegram用户的id，例如：129xxx206": "telegram用户的id，例如：129xxx206",
   "代理IP": "代理IP",
@@ -377,11 +379,15 @@
   "iGot的信息推送key，例如：https://push.hellyw.com/XXXXXXXX": "iGot的信息推送key，例如：https://push.hellyw.com/XXXXXXXX",
   "微信扫码登录后一对一推送或一对多推送下面的token(您的Token)，不提供PUSH_PLUS_USER则默认为一对一推送，参考 https://www.pushplus.plus/": "微信扫码登录后一对一推送或一对多推送下面的token(您的Token)，不提供PUSH_PLUS_USER则默认为一对一推送，参考 https://www.pushplus.plus/",
   "一对多推送的“群组编码”（一对多推送下面->您的群组(如无则创建)->群组编码，如果您是创建群组人。也需点击“查看二维码”扫描绑定，否则不能接受群组消息推送）": "一对多推送的“群组编码”（一对多推送下面->您的群组(如无则创建)->群组编码，如果您是创建群组人。也需点击“查看二维码”扫描绑定，否则不能接受群组消息推送）",
+  "用户令牌，扫描登录后 我的—>设置->令牌 中获取，参考 https://www.weplusbot.com/": "用户令牌，扫描登录后 我的—>设置->令牌 中获取，参考 https://www.weplusbot.com/",
+  "消息接收人": "消息接收人",
+  "调用版本；专业版填写pro，个人版填写personal，为空默认使用专业版": "调用版本；专业版填写pro，个人版填写personal，为空默认使用专业版",
   "飞书群组机器人：https://www.feishu.cn/hc/zh-CN/articles/360024984973": "飞书群组机器人：https://www.feishu.cn/hc/zh-CN/articles/360024984973",
   "邮箱服务名称，比如126、163、Gmail、QQ等，支持列表https://github.com/nodemailer/nodemailer/blob/master/lib/well-known/services.json": "邮箱服务名称，比如126、163、Gmail、QQ等，支持列表https://github.com/nodemailer/nodemailer/blob/master/lib/well-known/services.json",
   "邮箱地址": "邮箱地址",
   "SMTP 登录密码，也可能为特殊口令，视具体邮件服务商说明而定": "SMTP 登录密码，也可能为特殊口令，视具体邮件服务商说明而定",
   "PushMe的Key，https://push.i-i.me/": "PushMe的Key，https://push.i-i.me/",
+  "自建的PushMeServer消息接口地址，例如：http://127.0.0.1:3010，不填则使用官方消息接口": "自建的PushMeServer消息接口地址，例如：http://127.0.0.1:3010，不填则使用官方消息接口",
   "请求方法": "请求方法",
   "请求头Content-Type": "请求头Content-Type",
   "请求链接以http或者https开头。url或者body中必须包含$title，$content可选，对应api内容的位置": "请求链接以http或者https开头。url或者body中必须包含$title，$content可选，对应api内容的位置",

src/pages/config/index.tsx

@@ -136,6 +136,7 @@ const Config = () => {
             lineNumbersMinChars: 3,
             folding: false,
             glyphMargin: false,
+            accessibilitySupport: 'off'
           }}
           onMount={(editor) => {
             editorRef.current = editor;

src/pages/crontab/detail.tsx

@@ -110,6 +110,7 @@ const CronDetailModal = ({
           minimap: { enabled: false },
           lineNumbersMinChars: 3,
           glyphMargin: false,
+          accessibilitySupport: 'off',
         }}
         onMount={(editor, monaco) => {
           editorRef.current = editor;
@@ -161,8 +162,9 @@ const CronDetailModal = ({
             setValue(data);
           }
         });
-    } else if (result) {
+    } else {
       setValidTabs([validTabs[0]]);
+      setActiveTabKey('log');
     }
   };
 
@@ -358,10 +360,15 @@ const CronDetailModal = ({
     <Modal
       title={
         <div className="crontab-title-wrapper">
-          <div style={{ minWidth: 0 }}>
+          <div style={{ minWidth: 0, display: 'flex', alignItems: 'center' }}>
             <Typography.Text
-              style={{ width: '100%' }}
-              ellipsis={{ tooltip: currentCron.name }}
+              style={{ width: 200, boxSizing: 'content-box' }}
+              ellipsis={{
+                onEllipsis(ellipsis) {
+                  return ellipsis;
+                },
+                tooltip: currentCron.name,
+              }}
             >
               {currentCron.name}
             </Typography.Text>

src/pages/crontab/index.less

@@ -81,6 +81,7 @@
     display: flex;
     align-items: center;
     justify-content: space-between;
+    gap: 24px;
 
     .operations {
       display: flex;

src/pages/crontab/index.tsx

@@ -57,6 +57,7 @@ import { useVT } from 'virtualizedtableforantd4';
 import { ICrontab, OperationName, OperationPath, CrontabStatus } from './type';
 import Name from '@/components/name';
 import dayjs from 'dayjs';
+import { noop } from 'lodash';
 
 const { Text, Paragraph, Link } = Typography;
 const { Search } = Input;
@@ -75,18 +76,16 @@ const Crontab = () => {
           style={{
             wordBreak: 'break-all',
             marginBottom: 0,
-            color: '#1890ff'
+            color: '#1890ff',
+            cursor: 'pointer',
           }}
           ellipsis={{ tooltip: text, rows: 2 }}
+          onClick={() => {
+            setDetailCron(record);
+            setIsDetailModalVisible(true);
+          }}
         >
-          <Link
-            onClick={() => {
-              setDetailCron(record);
-              setIsDetailModalVisible(true);
-            }}
-          >
-            {record.name || '-'}
-          </Link>
+          <Link>{record.name || '-'}</Link>
         </Paragraph>
       ),
       sorter: {
@@ -272,9 +271,14 @@ const Crontab = () => {
         record.sub_id ? (
           <Name
             service={() =>
-              request.get(`${config.apiPrefix}subscriptions/${record.sub_id}`)
+              request.get(`${config.apiPrefix}subscriptions/${record.sub_id}`, {
+                onError: noop,
+              })
             }
-            options={{ ready: record?.sub_id, cacheKey: record.sub_id }}
+            options={{
+              ready: record?.sub_id,
+              cacheKey: record.sub_id,
+            }}
           />
         ) : (
           '-'

src/pages/script/editModal.tsx

@@ -242,6 +242,7 @@ const EditModal = ({
             minimap: { enabled: false },
             lineNumbersMinChars: 3,
             glyphMargin: false,
+            accessibilitySupport: 'off'
           }}
           onMount={(editor) => {
             editorRef.current = editor;

src/pages/script/index.tsx

@@ -643,6 +643,7 @@ const Script = () => {
                 fontSize: 12,
                 lineNumbersMinChars: 3,
                 glyphMargin: false,
+                accessibilitySupport: 'off'
               }}
               onMount={(editor) => {
                 editorRef.current = editor;

src/pages/setting/dependence.tsx

@@ -48,8 +48,9 @@ const Dependence = () => {
         pick(systemConfig, dataMap[path]),
       )
       .then((res) => {})
-      .catch((error: any) => {
-        console.log(error);
+      .catch(() => {
+        setLoading(false);
+        setLog((p) => `${p}update mirror error`);
       });
   };
 

src/utils/config.ts

@@ -95,6 +95,7 @@ export default {
     { value: 'aibotk', label: intl.get('智能微秘书') },
     { value: 'iGot', label: 'IGot' },
     { value: 'pushPlus', label: 'PushPlus' },
+    { value: 'wePlusBot', label: intl.get('微加机器人') },
     { value: 'chat', label: intl.get('群晖chat') },
     { value: 'email', label: intl.get('邮箱') },
     { value: 'lark', label: intl.get('飞书机器人') },
@@ -190,6 +191,10 @@ export default {
         label: 'barkUrl',
         tip: intl.get('BARK推送消息的跳转URL'),
       },
+      {
+        label: 'barkArchive',
+        tip: intl.get('BARK是否保存推送消息'),
+      },
     ],
     telegramBot: [
       {
@@ -308,6 +313,27 @@ export default {
         ),
       },
     ],
+    wePlusBot: [
+      {
+        label: 'wePlusBotToken',
+        tip: intl.get(
+          '用户令牌，扫描登录后 我的—>设置->令牌 中获取，参考 https://www.weplusbot.com/',
+        ),
+        required: true,
+      },
+      {
+        label: 'wePlusBotReceiver',
+        tip: intl.get(
+          '消息接收人',
+        ),
+      },
+      {
+        label: 'wePlusBotVersion',
+        tip: intl.get(
+          '调用版本；专业版填写pro，个人版填写personal，为空默认使用专业版',
+        ),
+      },
+    ],
     lark: [
       {
         label: 'larkKey',
@@ -334,6 +360,11 @@ export default {
         tip: intl.get('PushMe的Key，https://push.i-i.me/'),
         required: true,
       },
+      {
+        label: 'pushMeUrl',
+        tip: intl.get('自建的PushMeServer消息接口地址，例如：http://127.0.0.1:3010，不填则使用官方消息接口'),
+        required: false,
+      },
     ],
     chronocat: [
       {

src/utils/http.ts

@@ -1,29 +1,44 @@
-import intl from 'react-intl-universal'
+import intl from 'react-intl-universal';
 import { message } from 'antd';
 import config from './config';
 import { history } from '@umijs/max';
-import axios, { AxiosError, AxiosInstance, AxiosRequestConfig } from 'axios';
+import axios, {
+  AxiosError,
+  AxiosInstance,
+  AxiosRequestConfig,
+  AxiosResponse,
+  InternalAxiosRequestConfig,
+} from 'axios';
 
-interface IResponseData {
+export interface IResponseData {
   code?: number;
   data?: any;
   message?: string;
   error?: any;
 }
 
-type Override<
+export type Override<
   T,
   K extends Partial<{ [P in keyof T]: any }> | string,
 > = K extends string
   ? Omit<T, K> & { [P in keyof T]: T[P] | unknown }
   : Omit<T, keyof K> & K;
 
+export interface ICustomConfig {
+  onError?: (res: AxiosResponse<unknown, any>) => void;
+}
+
 message.config({
   duration: 2,
 });
 
 const time = Date.now();
-const errorHandler = function (error: AxiosError) {
+const errorHandler = function (
+  error: Override<
+    AxiosError<IResponseData>,
+    { config: InternalAxiosRequestConfig & ICustomConfig }
+  >,
+) {
   if (error.response) {
     const msg = error.response.data
       ? error.response.data.message || error.message || error.response.data
@@ -38,6 +53,10 @@ const errorHandler = function (error: AxiosError) {
         history.push('/login');
       }
     } else {
+      if (typeof error.config?.onError === 'function') {
+        return error.config?.onError(error.response);
+      }
+
       message.error({
         content: msg,
         style: { maxWidth: 500, margin: '0 auto' },
@@ -105,21 +124,21 @@ export const request = _request as Override<
   {
     get<T = IResponseData, D = any>(
       url: string,
-      config?: AxiosRequestConfig<D>,
+      config?: AxiosRequestConfig<D> & ICustomConfig,
     ): Promise<T>;
     delete<T = IResponseData, D = any>(
       url: string,
-      config?: AxiosRequestConfig<D>,
+      config?: AxiosRequestConfig<D> & ICustomConfig,
     ): Promise<T>;
     post<T = IResponseData, D = any>(
       url: string,
       data?: D,
-      config?: AxiosRequestConfig<D>,
+      config?: AxiosRequestConfig<D> & ICustomConfig,
     ): Promise<T>;
     put<T = IResponseData, D = any>(
       url: string,
       data?: D,
-      config?: AxiosRequestConfig<D>,
+      config?: AxiosRequestConfig<D> & ICustomConfig,
     ): Promise<T>;
   }
 >;

version.yaml

@@ -1,11 +1,8 @@
-version: 2.17.4
-changeLogLink: https://t.me/jiao_long/405
-publishTime: 2024-04-26 22:00
+version: 2.17.7
+changeLogLink: https://t.me/jiao_long/408
+publishTime: 2024-06-30 16:00
 changeLog: |
-  1. 增加示例脚本
-  2. 修复上传脚本文件名乱码
-  3. 修复飞书通知结果校验
-  4. 修复删除日志提示
-  5. 修复自定义通知 text/plain 类型
-  6. 修复脚本和日志列表软连接循环报错
-  7. 修复 python 通知文件自定义 send
+  1. 修复更新任务状态错误
+  2. 修复查询系统 health 状态错误
+  3. 修复更新 linux 镜像源错误
+  4. npm 包支持 alpine 和 debian、ubuntu，修复 linux 依赖安装命令